07-21-2009, 02:59 PM
|
#121 |
|
Member
Donut master
Join Date: Jan 2008
Posts: 113
|
LOL. Last time I knew anything about this car you had painted it pink. The pink fish =O
I think it's safe to say that this car has come a LONG way. Way sweet dude.
__________________
|
|
|
|
07-24-2009, 06:57 PM
|
#122 |
|
Touge Police
Bucket, coils, lsd
Join Date: Aug 2008
Location: BEND, OR
Posts: 444
|
Update:
Mostly was waiting for parts this last few weeks. Got a lot done... J30 Axles came in Ichiba front 5 Lugs came in and ontop of that been doing a shit ton of work to get things in place so forth... Finally cut the passenger side Toe Rod off... took forever.... and 3 blades  Waiting to get a fitting pressed into the BMC.... (as of today) to get my drivers-side brake working.  Ichiba 5-Lug fronts came in...    Got the Front Calipers painted, and installed, including the Stainless Steel lines... (thanks for the painting help Alicia)             Still need to put the rear valances back on... hehe... For right now it sits pretty high for quite a few reasons. I am utilizing Z32 rear uprights for the moment, my Z wheels also need to be spaced in the rear they are hitting the rear springs/strut I could adjust the suspension more but I still need wheel spacers regardless so i'll just do everything at once. I may also switch the 5 lugs in the rear to the 240sx rear spindles/hubs, as of right now i'm using Z32 spindles/rear hubs in which I have to use the Z32 uprights, but I didn't like how everything went together.... so soon as I get my drivers side hub/spindle back from a friend i'll convert the Z 5 lugs to the 240sx hub, and put my KYB's and springs back on which will tuck the rear.... Lastly the interior is ready for paint just waiting on money. Anyways a lot more then this was done but this is all I got pictures of mainly. |
|
|
|
|
07-24-2009, 09:10 PM
|
#123 |
|
Member
Clutches hate me
Join Date: Oct 2007
Posts: 221
|
Great work man! Its shaping up very nicely
|
|
|
|
|
07-28-2009, 08:50 PM
|
#124 |
|
Touge Police
Bucket, coils, lsd
Join Date: Aug 2008
Location: BEND, OR
Posts: 444
|
Took a picture of it on all 4's outside and away from the Fort... It's slowly getting there...
 Also made this teaser (the engine/exhaust/driveby sounds are from today) VIDEO: http://www.vimeo.com/5810352 =the video might still be converting depending on when people look= |
|
|
|
|
08-06-2009, 10:36 PM
|
#125 |
|
Member
Donut master
Join Date: Dec 2008
Posts: 136
|
damn man the car looks great good job
|
|
|
|
|
08-07-2009, 12:38 PM
|
#126 |
|
Fucking Fords!! Egh!!
I am so over drifting
Join Date: Sep 2008
Location: Gillespie Il
Posts: 2,094
|
I was to lazy to click on the link..
|
|
|
|
|
08-07-2009, 01:34 PM
|
#127 |
|
Member
Donut master
Join Date: Jun 2009
Location: Licking Missouri
Posts: 113
|
Wow that looks aton better. Is that the same one u and blair drove down and got my rx7?
__________________
90 240sx- In the works... |
|
|
|
|
08-08-2009, 02:48 PM
|
#128 | |
|
Touge Police
Bucket, coils, lsd
Join Date: Aug 2008
Location: BEND, OR
Posts: 444
|
Quote:
========== Thank you for all the compliments. ========== Been a little bit since I last updated so i'll try and sum up all the work... or like always you can read through it via my build thread http://www.touge-cor.com/viewtopic.php?f=12&t=270 ========== * Rear brake hardline fixed (had a pinhole in the old one) * Most external trim pieces replaced, or repainted and cleaned up now back on the car * A portion of the front interior has been replaced/put in (it's temporary until I paint the interior and repair any damaged interior pieces) * Taillight wiring fixed * Z32 E-Brake lines and custom brackets fabricated, e-brake functioning * Z32 drums adjusted * 2 used tires for front wheels (mount and balanced) * APEXI dual funnel intake filter * Front Sway-bar and Syko sway bar spacers in * Front upper strut brace in (temporary, going to repaint it) * J30 Speedo and Tach into S13 SOHC Cluster Housing (Calibrated and dead on, utilized my ConZult and NissanDatascan to calibrate/confirm) Alignment done... Need front wheel spacers and front adjustable arms (utilizing as close to stock alignment as possible for now) Front Left - -------- - Front Right -1.0 Camber -1.1 6.2 Caster 6.3 0.06 Toe 0.10 Rear Left - -------- - Rear Right -1.0 Camber -1.0 0.13 Toe 0.13 Heres some pics... not much.. Before  After   J30 Top SOHC Bottom  Few hours of fabrication... and done  I am not planning on doing much to the car this month. So... I'll post agan probably in September. I might not be coming out this fall, I'll explain later when i'm allowed to... (its nothing bad, I just agreed not to say anything for a little bit) If I don't make it out by Fall, I will do my BEST to get out by Spring. |
|
|
|
|
|
08-10-2009, 05:44 PM
|
#129 |
|
Touge Police
Bucket, coils, lsd
Join Date: Aug 2008
Location: BEND, OR
Posts: 444
|
|
|
|
|
|
08-11-2009, 08:36 AM
|
#130 |
|
drifting withdrawls :(
Gone into OverDrift
Join Date: Mar 2007
Location: St.Peters
Posts: 4,663
|
i dig it!
__________________
(OΞO/- -\OΞO) ** ŦЄąМ ת?Лخ∂ **  Manuka Dojo |
|
|
|
|
08-13-2009, 08:15 PM
|
#131 | |
|
Touge Police
Bucket, coils, lsd
Join Date: Aug 2008
Location: BEND, OR
Posts: 444
|
Quote:
=== Took some pics today out of boredom.         
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
DriftSTL Google Enhanced Uber Search. Commence the Searching!
All times are GMT -5. The time now is 05:12 AM.